GENESIS TECH

Owner's Manual

Athan Table Clock

Prayer times · Athan · Alarms · Timer · Stopwatch

Designed and built by
GENESIS TECH, a sister company of USA Heating and Air Inc.

Greenville, North Carolina

Athan Table Clock · Owner's ManualWelcome

Welcome to your clock

This clock sets its own time over WiFi and plays the Athan at each prayer time for where you live. It is also an alarm clock, a kitchen timer and a stopwatch. You set everything up from your phone's web browser. No app to install, no account to create.

In the box

Athan Table Clock
USB-C power supply (5 V, 3 A) and cable
This manual

You will need

A home WiFi network (2.4 GHz)
Your WiFi password
A phone, tablet or computer

Meet your clock

1 Display. Shows the time, date, prayer countdown, timer and stopwatch.

2 Dome light. Glows softly. Turns green while the Athan plays.

3 Button. On top, on the left side. Stops sounds and does quick jobs (page 4).

4 Light sensor. Below the colon. Dims the display in a dark room. Keep it uncovered.

5 Speaker. Underneath. The sound bounces off the table, so keep the bottom clear.

6 USB-C power. At the back, lower left.

GENESIS TECH2

Athan Table Clock · Owner's ManualSetup

Getting started

Setup takes about five minutes and you only do it once. The clock remembers everything, even when unplugged.

Place it and plug it in

Set the clock on a flat, hard surface. The speaker plays through the bottom, so don't put it on a cloth or cushion. Plug the USB-C cable into the back and the power supply into the wall. The display lights up.

Connect it to your WiFi

The first time it starts, the clock creates its own WiFi network called Table-Clock-Setup. On your phone, open Settings › Wi-Fi and join it. A setup page opens by itself. If it doesn't, open your browser and go to 192.168.4.1.

Tap Configure WiFi, choose your home network, type the password and tap Save. The clock joins your WiFi and scrolls its network address across the display. Write that number down in case you need it later.

Open the settings page

Put your phone back on your home WiFi. Open the browser and go to athantable.local. If that doesn't open (some Android phones), type the number the clock scrolled, such as 192.168.1.42. Save the page to your home screen so it's one tap away.

Set your location

Scroll to Location & method. Type your city or ZIP code, tap Look up and pick your city. The latitude, longitude and time zone fill in for you. Choose your calculation method (ISNA is common in North America) and Asr (Standard or Hanafi), then tap Save settings.

Until a location is saved, the clock flashes LOC once a minute.

Good to know. The clock gets the exact time from the internet. A built-in backup battery keeps the time through power cuts, so it is right even before WiFi reconnects. Daylight saving changes happen automatically.

GENESIS TECH3

Athan Table Clock · Owner's ManualEveryday use

Reading the display

The colour of the digits tells you what the clock is showing.

	You see	It means
	White digits	The current time. You can change this colour.
	Soft blue	The date, briefly every 30 seconds (month and day, then year).
	Amber	Countdown to the next prayer, in the last 10 minutes.
	Green pulse	The Athan is playing.
	Time flashing	An alarm is ringing.
	Cyan	The timer is counting down. donE flashes when it finishes.
	Bright green	The stopwatch.
	Red colon (steady)	The Athan is muted. Alarms still ring.
	Blue colon	An alarm is snoozing and will ring again.
	LOC	No location saved yet. See page 3, step 4.

The button

One button on top. A hold means press and keep holding for the time shown.

When	Short press	Hold
Showing the time	Countdown 5 s, then the date	3 s: mute / unmute Athan
Athan playing	Stop the Athan	(none)
Alarm ringing	Stop the alarm	1.5 s: snooze
Timer finished	Stop the sound	(none)
Timer on the display	Pause or resume	1.5 s: cancel the timer
Stopwatch on the display	Start or pause	1.5 s: reset to zero

GENESIS TECH4

Athan Table Clock · Owner's ManualAthan

Prayer times & Athan

The clock works out the five daily prayer times for your location each day and plays the Athan at each one. Today's times are listed at the top of the settings page, with the next prayer highlighted.

Each prayer

Under Athan, switch the Athan on or off for each prayer. You can also move each prayer up to 5 minutes earlier or later to match your local masjid.

Calculation method

ISNA, Muslim World League, Egyptian, Karachi, Umm al-Qura or Dubai. Asr can be Standard (Shafi'i) or Hanafi. Both are under Location & method.

Muting the Athan

Mute 1 hSilent for the next hour, then back to normal by itself.

Mute until FajrSilent through tonight, including Fajr. Good for guests or a sleeping baby.

Mute allSilent until you turn it back on. You can also hold the button for 3 seconds.

Cancel muteTurns the Athan back on now.

While muted, the colon stays red. Alarms and the timer still ring. To stop an Athan that is already playing, press the button once.

Volume and options

Day volume: for Dhuhr, Asr, Maghrib and Isha (0–30).

Fajr volume: set separately, usually softer for early morning.

Lower when room is dark: uses the Night volume when the lights are off.

Green flash during Athan: the digits pulse green while it plays.

Countdown in last 10 min: amber countdown before each prayer.

Dua after Athan: plays the dua after the Athan, if a dua recording is installed.

Try it now. The buttons at the top of the page (Test chime, Test Athan and Test Fajr Athan) play the sound right away so you can set the volume. Stop ends it.

GENESIS TECH5

Athan Table Clock · Owner's ManualAlarms

Alarms

The clock holds six alarms, each with its own time, days and tune. You'll find them in the Alarms section of the settings page.

Setting an alarm

Tick the box next to Alarm 1 (up to 6) to turn it on, then set the time.

Tick the days it should ring: Su Mo Tu We Th Fr Sa. Leave every day unticked for a one-time alarm. It rings once and then turns itself off.

Choose a tune and tap ▶ to hear it. Add a label if you like, such as "School" or "Work".

Tap Save alarms or Save settings (either one saves). The page then shows your next alarm, for example "Next alarm: Thu 6:30 AM".

When it rings

Stop

Press the button once, or tap Stop on the settings page.

Snooze

Hold the button for 1.5 seconds. The colon turns blue until it rings again.

Do nothing

The time flashes and the tune repeats, then stops by itself after a few minutes.

Alarm settings

Alarm & timer volumeSeparate from the Athan volume. It isn't lowered at night.

SnoozeMinutes until a snoozed alarm rings again. Set 0 to turn snooze off.

Stop ringing afterHow many minutes an alarm rings before it gives up.

Timer tuneThe sound the timer plays when it finishes.

Good to know. The Athan always comes first. An alarm due while the Athan plays rings right after it finishes. Alarms still ring when the Athan is muted. When testing, set the alarm at least 2 minutes ahead.

GENESIS TECH6

Athan Table Clock · Owner's ManualMore features

Timer, stopwatch & display

Timer

Tap 5 min, 10 min or 15 min, or enter your own time up to 9 h 59 min and tap Start custom. It counts down on the clock in cyan. Use Pause, +1 min or Cancel on the page, or the button on the clock. When time is up, donE flashes and the timer tune plays. Press the button to stop it.

Stopwatch

Tap Start on the page, or press the button while the stopwatch is showing. It runs on the clock in green. Press again to pause. Tap Reset, or hold the button for 1.5 seconds, to go back to zero.

Display settings

Under Display on the settings page. Tap Save settings and the clock changes right away.

Clock colourAny colour you like for the time.

24-hour timeShows 18:30 instead of 6:30.

DateTurn it on or off, choose how often it appears, the order (MM DD or DD MM), whether to show the year, and its colour.

Dome lightOn or off, its colour, and whether it glows green during the Athan.

Brightness, bright roomHow bright the clock gets in daylight. Lower it if a shiny table reflects light onto the sensor.

Brightness, dark roomHow dim it goes at night. The light sensor moves between these two levels by itself.

Protect your settings with a PIN

Anyone on your WiFi can open the settings page. To stop curious children or guests from changing things, go to Security, type a 4-digit New PIN and save. After that, enter it as the Current PIN whenever you save. To remove the PIN, type none as the new PIN.

GENESIS TECH7

Athan Table Clock · Owner's ManualHelp

Help & care

Problem	Try this
No sound	Check that the volume sliders aren't at 0 and the colon isn't red (muted). Tap Test chime.
An alarm didn't ring	Check it is ticked, the right days are ticked, and you saved. The page should show "Next alarm".
athantable.local won't open	Make sure your phone is on the same home WiFi. Or type the clock's number (it scrolls when the clock starts).
Prayer times look off	Check your location, method and Asr setting. Fine-tune each prayer by up to ±5 minutes.
Too bright or too dim	Adjust the two brightness sliders under Display. Keep the light sensor below the colon uncovered.
Can't find the WiFi in setup	The clock works with 2.4 GHz WiFi only. Most routers offer it. Pick the 2.4 GHz network name.

New WiFi or starting over

Change WiFi: unplug the clock. Hold the button, plug it back in, and let go when ---- appears. The Table-Clock-Setup network opens again (see page 3, step 2).

Factory reset: do the same, but keep holding for about 10 seconds. The display counts down rSt3, rSt2, rSt1 and then shows donE. This erases all settings, alarms and WiFi.

Care

For indoor, dry places only.
Wipe with a soft, dry cloth.
Use the supplied 5 V, 3 A USB-C power supply.
Keep the bottom clear. The speaker is there.

Specifications

Size: 27.6 × 11.7 × 6.6 cm (10.9 × 4.6 × 2.6 in)

Power: USB-C, 5 V 3 A

WiFi: 2.4 GHz

Time: internet, with a backup battery

Features: 5 daily Athan, 6 alarms, timer, stopwatch

Designed and built by GENESIS TECH, a sister company of USA Heating and Air Inc.
genstechnc@gmail.com · genstechnc.com
PO Box 30106, Greenville, NC 27833